How to hang heavy things on drywall




How to hang heavy things on drywall

Article Navigation:
  • Photo
  • How to Choose the Right Hanging Hardware | This Old House
  • Video
  • RELATED PAGES
  • How to Hang Heavy Items Without a Stud A close up of them for several seconds front and back of the drywall individually. Also if we could.

    When the included screw is driven into the anchor, the anchor expands to lock into the drywall. 2 For Heavy Items: Toggle Anchors. toggle.

    Need to hang a heavy mirror or picture? Use these helpful tips to hang it To see if you have drywall or plaster, push a tack into the wall. If it goes in easily.

    How to hang heavy things on drywall

    How to hang heavy things on drywall

    Determine where you want to hang your item. Anchors like the blue one don't expand enough to grab well in drywall; they work better in plaster and best in masonry. Clean the wall with rubbing alcohol for a better hold. Measure the length of the slack if the item you are hanging has a wire on the back of it. Measure from the bottom of the object to where the wire catches.

    How to hang heavy things on drywall

    How to hang heavy things on drywall

    How to hang heavy things on drywall

    How to hang heavy things on drywall

    How to hang heavy things on drywall

    No wall stud where you need it? You can attach anything to hollow drywall or plaster if you use the right fastener. There's no doubt about it. It's tricky to fasten something to drywall when it has to go between studs.

    Plaster walls and hollow-core doors are no picnic to work on either. These surfaces separate space, not support weight. But, fortunately, there is an anchor for just about any hanging job you can think of.

    How to hang heavy things on drywall

    Put together your own collection, and you won't need to run to the store every time a hanging job comes up—or worry about your wall art crashing to the ground. Here are the best fasteners for common household hang-ups. Available in several varieties, these work well for light less than 10 pounds and medium loads 10 pounds to 25 pounds. Anchors like the blue one don't expand enough to grab well in drywall; they work better in plaster and best in masonry. Anchors designed to spread their "wings" right are less susceptible to withdrawal.

    How to use them: Drill a hole that allows a snug fit for the sleeve. You should need to tap it home with a hammer until the anchor flange seats against the surface. Fasten by driving a screw into the sleeve. Depending on size, sleeves will take 4, 6 or 8 screws. Heavy picture frames, bulletin boards, smoke alarms, doorbell chimes, lightweight shelving, wall-mounted light fixtures, and wall-mounted mirrors on plaster walls. The most popular all-purpose drywall anchor.

    How to hang heavy things on drywall

    These are great for light less than 10 pounds to medium loads 10 pounds to 25 pounds , and are available in metal and plastic. How to use it: Simply screw the anchor into the wall with a Phillips screwdriver or cordless drill fitted with a Phillips bit. Attach the item by driving a 6 or 8 screw into the anchor hole. Heavy picture frames, bulletin boards, smoke alarms, door chimes, lightweight shelving, wall-mounted light fixtures, wall-mounted mirrors on drywall.

    It's good to have a selection of these on hand in different sizes. Large versions installed with an angled nail can support up to 20 lbs. For heavier loads 25 pounds to 50 pounds , use a flat-mounted hook and an anchor.

    These are not as easy to use as other drywall anchors, but they're still good to have on hand for medium 10 pounds to 25 pounds to heavy loads 25 pounds to 50 pounds. Pointed mollys right can be tapped into place with a hammer. Nonpointed versions require an installation hole, and work well in old plaster-and-lath walls. Seat the round flange flush with the wall surface by tapping the screwhead. Turn the screw to "mushroom" the slotted sleeve against the back wall surface.

    How to hang heavy things on drywall

    Take care not to overtighten; you'll know this is happening if the anchor flange starts to depress the surface of the plaster or drywall. Once the molly is secure, unscrew the bolt and then replace it with the item in place.

    Towel racks on plaster, heavy-duty shelving on drywall and plaster, curtain rod supports on drywall and plaster, and wall-mounted mirrors over 20 pounds on plaster. Tap the pointed end and flat shank into wall until the top flange is flush with the wall surface.

    How to fix really heavy things to walls - meet the Wall Bolt! GHTL#26 [151]



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲